Home > Knowledge > Content
Cause and treatment method of motor slip ring burning
- Feb 02, 2018 -

The causes and treatment methods of motor slip ring burning are as follows:

1, the jaw broken motor brush Pressure adjustment unevenness: should be adjusted according to the regulation pressure.

2, brush and lead contact bad: should be wired.

3, slip ring surface uneven, there are sand holes, hemp point: should be processed grinding flat.

4, the wrong brush selection or poor quality: should be replaced by the manufacturer specified brush.

5, improper maintenance, long-term not swept, slip ring surface dirt: should be regularly cleaned.

6, maintenance quality is not high or improper brush adjustment: should improve the quality of maintenance.

Related Products